Bitmain is a technology company specializing in high-speed, low-power custom chip design and development, successfully designed and produced a variety of ASIC custom chips and integrated systems. Bitmain was founded in 2013. In the same year, it launched the first generation bitcoin mining machine of the ant mining machine series - Antminer S1. After more than five years of development, the antminer series bitcoin mining machine passed S1, S2, S3, S4 Iterations of multiple models of S5, S7 and S9, the latest bitcoin mining models are S15 and T15, which will be sold on November 8, 2018.
The Antminer S15 adopts a new 7nm chip process. The official evaluation of the S15 is durable, energy saving. Emphasizing the characteristics of "high performance, more durable, and more power saving". From the officially announced parameters, the Antminer S15 is built in. Standard and low-power mining modes. The officially announced parameters have a unit-to-power ratio of 57J/T in standard mode, and the unit-to-power ratio of low-power mode has reached 50J/T. Compared to the products in the current market, in terms of Bitcoin miners, this unit power consumption ratio has set a new record.
Antminer S15 official parameters,
https://i.redd.it/9fgwfaqp6bd21.jpg
Recently, the Antminer S15 has sent to Cybtc for testing. Please see the third-party independent review by us.
I. Unpacking:
Because the Antminer S15 adopts a new all-in-one and parallel fan design, the packaging box has changed from the previous generations. The previous cuboid has changed into a square-like style. The packaging material is still packaged in an industrial carton, and the box is marked manufacturer information, logistics warehousing logo, mining machine specification model and strip identification code, outer box size: 486*388*265, weight about 8.7kg.
The interior of the two pieces of styrofoam is firmly packed in the box from the upper and lower sides to ensure the safety of the mining machine during transportation. There is also a gap around the pearl foam for easy access.
Take out the styrofoam on one side to see the main body of the mining machine. The mining machine is wrapped by an anti-electrostatic bag. Compared with the box, the mining machine looks very small and only takes up about half of the box space.
The Antminer S15 changed the style of single-tube with double cooling fans as S1-S9 models, and became a dual-fan parallel single-side air intake and adopted the integrated machine design of the mining machine + power supply. The whole machine size is 279*175*221mm, weight 7.13 kg.
https://i.redd.it/k0xp89yy6bd21.jpg
The Antminer S15 is small and neat, the air inlet side and the mining machine interface side are on the same side, the fan is removed from the air outlet side, and a honeycomb-shaped baffle is used.
https://i.redd.it/ex187jf27bd21.jpg
The advantage of the all-in-one design is that the wire connection is reduced. The appearance of the mining machine is more compact, and the use and operation and maintenance are more convenient. The connection between the Antminer S15 mining machine and the power supply uses a clip-connected design, and the controller and the power board are still connected by flat signal cable.
https://i.redd.it/85cz4u4c7bd21.jpg
The nameplate of the mining machine body is marked with the model number, hash rate, and identification bar code. If the bottom part can increase the anti-slip mat, it is better to strengthen the stability of the mining machine when it is placed horizontally. The mining machine supports the erect and horizontal two ways. On the rack, the miner can choose the placement method according to the size of the mine rack.
https://i.redd.it/wxavyize7bd21.jpg
II. Antminer S15 installation:
The design of the Antminer S15 all-in-one machine reduces the link of the power line of the plugging and unloading machine. As long as it is placed in the rack, plug in the power cable and the network cable to complete the hardware installation.
Find the mine IP address. Antminer S15 mining machine is automatically assigned IP mode, you can enter the local router to view the IP address named "antMiner".
Or use the ant official mining machine management software BitmainMinerTool to scan the IP address of the current mining machine. You can also use the management software to set the mining pool address and worker name, update the firmware, etc. When the number of mining machines is large, you can also use the mining machine. IP report button to find the IP address of the mining machine.
To view the real-time status of a single mining machine, you need to enter the mining machine control page. First, enter the mining machine IP into the control page home page, and then enter the default user name and password (the default is root) to enter the mining machine control page.
The new mining machine needs to modify the name of the mining pool and miners, click on the “Miner Configuration” page to modify the main mining pool address and worker name, and modify the two alternate mining pool addresses and miners' names as needed. Antminer S15 has built-in standard and low-power mining modes, so you can easily select any mode mining on this page according to your needs. After each setting is completed, click “Save&Apply” to save the settings and apply.
After saving, the miner will restart the mining procedure. After about a few minutes of normal operation of the mining machine, you can enter the mining operation interface “Miner Status” to check the operation of the mining machine, including running time, hash rate, Chip status, operating frequency, PCB board and chip temperature, fan speed and other parameters information.
III. Review:
The Antminer S15 has standard mining mode and low power consumption mode. Therefore, we tested the two modes for 24 hours respectively. The test environment temperature is about 17 degrees, and the noise value is around 36 decibels.
https://i.redd.it/2wzornwmabd21.jpg
After the mining machine is turned on, the fan runs at full speed, the power consumption of the boot is about 25W and further increases slowly, and the noise level is up to 81.2 dB.
Standard mode test
Power consumption: The miner's chip is fully operational, and the control page power is 28T. The measured power consumption of the miner is 1610-1620W, which is in line with the officially announced 1596W ±7% level.
Noise: Due to the low ambient temperature, the number of fan rotations is basically stable at around 3120 rpm. The noise value of the operating environment is measured to be 76.5 decibels. The distance of the mine is 27.7 meters, and the noise level is properly controlled.
Temperature: Antminer S15 has a total of four mining boards. There are four temperature-sensing modules distributed on each calculation board. The chip temperature is at least 44 degrees and the highest is 78 degrees. Thanks to the Exposed Die package, the outlet temperature is about 42 degrees. The power outlet temperature is about 28 degrees.
https://i.redd.it/h71plzf0bbd21.jpg
Because the Antminer S15 adopts the one-piece design, We also test the contact temperature of the power supply and the mining machine's power board. It can be clearly seen that the temperature values of each point are different.
https://i.redd.it/4ghcl4i3bbd21.jpg
Hash rate: After 24 hours test in the btc.com mining pool, the average hash rate of the Antminer S15 in 24 hours was 28.56 TH/s. Thus calculate the unit energy efficiency ratio = 1620W / 28.56 ≈ 56.72W / T, and the official published data 57 J / T consistent.
Low power mode test
Power consumption: After checking the option behind “Low Power Mode” on the Antminer S15 Pool Settings page and saving the application, the miner can run in low power mode. After the power of the mining machine control page reaches 17T, the measured power consumption is up to 836.6W, and the running data meets the official data of 775W ±7% - 900W ±7%.
Noise: As the power and power consumption are reduced, the fan speed is basically stable at around 2400 rpm, the measured operating environment noise value is 77 decibels, and the distance measured by the mining machine is about 66 decibels at a distance of 2 meters. The noise level and the standard mode. At the same level.
Temperature: The four mining board chips have a minimum temperature of 25 degrees and a maximum of 62 degrees. The outlet temperature is about 30 degrees, which is slightly lower than the standard mode. The temperature of the power outlet is about 20 degrees.
https://i.redd.it/r4f2ww96cbd21.jpg
Contact point temperature value between the power supply and mining machine mining board.
https://i.redd.it/fskmubi8cbd21.jpg
Hash rate: After 24 hours of testing in the btc.com mine, the average 24-hour power was measured at 17.5TH/S. Thus calculate the unit energy efficiency ratio = 836.6W / 17.5 ≈ 47.8W / T, lower than the official published data 50 J / T.
IV. Summary:
Two built-in mining modes. The power consumption per unit of power in low-power mode is lower than 50W/T, which is better. The lower the power consumption ratio, the lower the price of the shutdown.
One machine design reduces the wire, beautiful and convenient.
Exposed Die package improves heat dissipation, increasing the number of chips per unit volume and reducing heat sinks, reducing overall weight.
The new AWP8 power supply is used, easy to assemble and disassemble.
The machine noise is lower and the temperature is lower than other mining machines.
The calculation power of the whole machine is stable and fluctuating.
Finally, exposed power connectors may cause problems if touch the iron on the shelf. Maybe it can have improvement.
The Antminer series mining machine has evolved from S1 to S15, and the computing power has evolved from S180's 180G/360W to S15's 28000G/1600W. This is not just a digital evolution, but also the ups and downs of the Bitcoin industry. The mining machine is upgrading. Bitcoin is advancing, leaving many stories in the chain, the currency circle and the mining ring than the ten-year journey of holding the currency. In the two-year life cycle of S9, S9's bitcoin mining machine market share is far ahead, and currently in the market background of the rising bitcoin computing power, the depressed bear market and more new mining machines, Whether the ant S15 can create a new benchmark for the bitcoin mining machine, time will give us the answer.
More miner and crypto reviews on: cybtc.org
Telegram：https://t.me/joinchat/LgPYnE1vPpXqYDVpPaQyxw
Discord：https://discord.gg/RfCZMNY
Submitted January 29, 2019 at 03:30PM by cybtc http://bit.ly/2SfzHcq
No comments :
Post a Comment